Used For: Duplication/Imaging, Partition/File Recovery, and RAID Analysis and Reconstruction.

Hardware-Software Complex with all functions of Data Compass Standard and extra opportunity to deal with raid data recovery (RAID 0, RAID 1, RAID 5, RAID 5E and RAID 5EE) if RAID system is:
1)with segment disk(s) missing;
2)with parameters and/or configurations corrupted;
3)with hardware array card or server system damaged.

Used For: Duplication/Imaging, and Partition/File Recovery.

The disk probing equipment bypassing the disk-level problems such as multiple bad sectors, damaged surfaces, malfunctioning head assembly, or corrupted servo info, while in the meantime you can use the default software provided or define any other software you have been familiar with (R-studio, Winhex, any) to perform file recovery. Through the Data Compass, problem drives will become intact hard drives and ready for file recovery attempts.

Used For:Data recovey for flash-based storage devices

Hardware-software complex for flash data recovery from the physically damaged flash storage devices when access to the user data is impossible by the native interface realized by the native controller.

It handles all models of flash devices with standard TSOP48 housing NAND chip (SD, SM ,MMC, XD, USB Pendrive, MemoryStick, CompactFlash etc.)

Used For:disk image, disk wipe, fast HDD auto detection

Hardware and software complex hard drive duplicator with image speed at 6GB/min and wipe speed at 6.6GB/min. DCK is able to be used in the following situations:

-Good hard drives;
-Hard drives with a lot of bad sectors;
-Hard drives with clicking/unstable heads but still detected in the bios
-Hard drives which are logically damaged.